Ravenol Hypoid EPX SAE 80 GL5
Ravenol gear oil EPX SAE 80W API GL 5
Monograde hypoid gear oil for synchronized and non-synchronized gearboxes, as well as for axle drives, transfer cases, intermediate gears, auxiliary gears in vehicles and machines.
RAVENOL Getriebeoel EPX SAE 80 GL 5 was developed for special applications in gears. RAVENOL Getriebeoel EPX SAE 80 GL 5 guarantees properties such as high pressure absorption capacity, above-average viscosity-temperature behavior , high oxidation stability, low pour points, good wear protection and freedom from sludge thanks to the balanced combination of additives.
Application note
RAVENOL Getriebeoel EPX SAE 80 GL 5 is compatible with all branded gear oils . When changing to RAVENOL Getriebeoel EPX SAE 80 GL 5 , "flushing" is not necessary.
RAVENOL Getriebeoel EPX SAE 80 GL 5 can be used in manual gearboxes, axles, distributors, intermediate and auxiliary gears in vehicles and machines.
characteristics
RAVENOL Getriebeoel EPX SAE 80 GL 5 offers:
- Optimally favorable cold flow properties.
- Excellent wear protection even in winter short-distance operation
- High-pressure stable lubricating film, therefore excellent wear protection under all loads, reduced gear noise and best gear efficiency under full load, ie even with very hot oil
- Excellent shear stability
- Very good oxidation stability, does not foam
- No oil thickening or deposits
- Exceptionally good resistance to aging
- Very good viscosity-temperature behavior
- Effective wear protection
- Exceptionally good corrosion protection, no rust, no attack on non-ferrous metals
- Neutral behavior towards sealing materials, ie the gear units remain tight, no oil losses
Technical specifications
- SAE 80W
- API GL-5
- MINERAL
- ZF TE-ML 05A
- ZF TE-ML 7A
- ZF TE-ML 17B
- MAN 342 TYPE M1
- ZF TE-ML 16B
- ZF TE-ML 16C
- ZF TE-ML 16D
- FORD SQM-2C-9002AA
- MB 235.0
Instruction according to § 8 para. 1 AltölV
In connection with the sale of combustion engine or transmission oil as well as oil filters, we are obliged as a dealer to inform about these regulations and obligations in accordance with the AltölV. We would like to point out that used oil or oil filters and oil-containing waste that regularly occurs during oil changes are hazardous materials that must be disposed of in an environmentally friendly manner. You can return the waste oil to us in the quantity corresponding to the quantity purchased from us.
The place of return is our place of business:
Augustin Group GmbH & Co. KG
Skandinavien-Bogen 5
24983 Handewitt
You can deliver the oils there at any time during our opening hours. Alternatively, you can also send us the used oil - if you pay the shipping costs. If you send us the used oil by mail, please note that special transport conditions may apply to used oil. In principle, the disposal of waste oil is also possible at petrol stations or recycling stations (e.g. recycling yard on site), sometimes for a fee. The local municipal information office will be happy to provide you with information on the disposal of waste oil. If you have any further questions about the disposal of waste oil, please contact us, we will be happy to advise you.
If you are a commercial end user, we would like to point out that we may use third parties to fulfil our acceptance obligations towards you.